CNC Turning Services– Aztalan Enginnering

CNC Turning

Aztalan Engineering has (14) CNC lathes with varying capabilities.

TWIN SPINDLE CNC TURNING SERVICES

Our 8 Okuma Twin Spindle Lathes provide up to full 7 axis power, allowing for full part creation on a single machine and higher throughput. The twin spindle lathes offer greater reliability, speed, and accuracy since the part is finished in a two-step process without operator handling. There are less labor requirements because automatic part loader/unloaders allow one person to operate two machines, substantially increasing productivity. These machines can be set up to run high volumes, and often are, they are also flexible enough to turn smaller batches efficiently.

The LFS 10 is ideal for high volume parts and part families. The LFS 10 features constantly high quality level of the turned parts, short part production times, long machine times, and high process stability. Our CNC turning services utilize twin turrets that accommodate 12 tools each. A tool change lasts no longer than 1.15 sec which – in combination with the dynamic axes – minimizes the non-productive time. The LFS 10 deploys a speedy 3-axis gantry loader with two grippers for part weights up to 2 x 3 kg. Finally, the OKUMA 2SP-150 H reliably keeps the machining tolerances below 10 µm in continuous operation.

TWIN SPINDLE EQUIPMENT LIST:

(1) Okuma LT-2000EX

  • Live Tooling and C-Axis on both turrets, simultaneous turning on both spindles
  • Y-Axis milling on the A-turret
  • IEMCA VIP-80EII Magazine Barfeeder
  • 2.5″ Bar Capacity
  • 30 HP Spindle Motor

(2) Okuma LT-10M, Twin Spindle, Twin Turret, Turning Centers

  • Live Tooling and C-Axis on both turrets, simultaneous turning on both spindles
  • Polygon Turning
  • Kennametal KM quick change tooling on both turrets
  • 2″ & 2-1/2″ Bar Capacity
  • Medaco 3-foot Barfeeder
  • Parts conveyor, “lights out” running capability

(3) Okuma LT-200MY, Twin Spindle, Twin Turret, Turning Centers

  • Live Tooling and C-Axis on both turrets, simultaneous turning on both spindles
  • Y-Axis milling on the A-turret
  • Kennametal KM quick change tooling on both turrets
  • 2″ & 2-1/2″ Bar capacity
  • Medaco 3-foot Barfeeder
  • Parts Conveyor, “lights out” running capability

Okuma LFS, twin spindle, twin turret, turning center

  • Integral gantry robot for load/unload and part transfer from spindle to spindle
  • 2 integral load/unload tables
  • Live Tooling, C-Axis on both turrets, simultaneous turning on both spindles
  • 6″ chuck capacity
  • .5 micron controller

CLICK HERE for a printable list.

SINGLE SPINDLE CNC TURNING

Our Hardinge Conquest single-spindle lathes offer super precision turning with live tooling and C-axis. As part of our CNC machining services, these lathes routinely produce turned parts with tolerances of +/- .0002 inches. Our bar capacities are 1 5/8″ – 2 1/2” with a 10” maximum part diameter. The Okuma LR10 lathes are equipped with live tooling, C-axis and dual turrets for producing very precise parts. They feature NC robots and robot carousels to load and unload parts.

SINGLE SPINDLE CNC TURNING EQUIPMENT LIST:

(1) Okuma LB2000EX-300-M Multifunction 2- Axis Lathe

  • Max machining diameter of 16.93” and max machining length of 11.81”
  • Live tooling
  • Auto Gauging, OLP-40, OMI-2
  • 0.1 Micron control

(2) Hardinge Conquest Super Precision, single spindle, single turret lathes

  • Live tooling and C-Axis
  • Fanuc OT controller
  • 2″ & 2-1/2″ Bar capacity, 10″ chuck capacity on the 2-1/2″ bar machine
  • Live tooling and C-Axis

(3) Hardinge Conquest Lathes

  • Live tooling and C-Axis
  • Fanuc OT controller
  • 1-5/8″, 2″ 7 2-1/2″ bar capacity
  • Live tooling and C-Axis

(2) Okuma LR-10, single spindle, twin turret turning center

  • Okuma Robot & load/unload parts carousel
  • Part probing
  • Live Tooling, C-Axis, 6″ chuck capacity
  • .5 micron controller

Click here for a printable list.